Bond Trading Corporation
卓上型配電線被覆剥離機
電線マン 品番：ADM-K01
（１．６ｍｍ～２．７ｍｍの伝染ＫＩ線やハーネスが簡単に剥離可能）
特徴：
細径のハーネス線などが剥離可能
今まで
大型設備でしかサイクルが困難とされていた細径のＫＩＶやハーネス線が、卓上でお手軽に行っていただけます。
自動車用・通信・制御用ハーネスを扱われる方にお勧めの商品です。
作業は安全で簡単
電線の径ごとの刃物高さ調節も必要なく、電線の侵入口は指が入らないサイズ
どなたでも簡単に！
そして安全に剥離作業をしていただけます
最適な刃圧力調整が可能
対象となる線を侵入するだけで被覆の剥離が可能ですが、被覆の素材や銅率によって
刃物の圧力を調節することができます。
それにより刃物自体も長持ちし、また被覆材も選びません。
（＊対象サイズにあっても被覆素材により剥離ができない場合もございますので
予めご了承ください）
スペック
ＡＣ１００Ｖ ８０Ｗ（５０Ｈｚ） ・ ９５Ｗ（６０Ｈｚ）
ＫＩＶ線などで被覆外径が１．６ｍｍ～２．７ｍｍの電線
（＊対応寸法内でも剥離できない線もありますので予めご了承ください）
超コンパクトサイズ ： Ｗ２５６ ｘ Ｄ１６５ ｘＨ１３９ｍｍ
軽量 ： 約１０．０Ｋｇｓ
剥離速度 ： 約１６ｍ / 分（安全に剥離作業をするための最速なスピードです）
Table-top wire and cable peeling unit
Model:ADM-K01
If can peel fine harnesses etc.,
This table top wire and cable peeling machine allows you to peel the fine
KIV cables or wire harnesses which are usually peeled only by large facilities. We recommended this to those who have wire harnesses made for automotive or network / controller.
The operation is safe and easy
The blades height does not need to be adjusted for each wire's diameters.
The insertion opening is small enough to prevent putting fingers.so anyone can use it safety and easily for peeling work
*Be careful not to
put your finger into the outlet
The blade is adjustable to get
the right pressure
Can peel any coating from any wire.
The alade pressure can be adjusted acording to the coating metarial and the copper content ratio. The blade lasts longer and corresponds
to any coating materials
*if you experiense problems peeling the wire coating due to the materials even within the applicable size.please ask us for more deails
power source : 100v ( can modify voltage for your request)
80W / 95W
(50Hz) (60Hz)
Applicable to : Φ1.6ｍｍ to Φ2.7mm
Peeling speed : approx 16m / min
Size:W256mm x D165mm x H139mm
Weight :Approx 10.0kgs
Table-top wire and cable peeling unit
Model:ADM-K01
If can peel fine harnesses etc.,
This table top wire and cable peeling machine allows you to peel the fine
KIV cables or wire harnesses which are usually peeled only by large facilities. We recommended this to those who have wire harnesses made for automotive or network / controller.
The operation is safe and easy
The blades height does not need to be adjusted for each wire's diameters.
The insertion opening is small enough to prevent putting fingers.so anyone can use it safety and easily for peeling work
*Be careful not to
put your finger into the outlet
The blade is adjustable to get
the right pressure
Can peel any coating from any wire.
The alade pressure can be adjusted acording to the coating metarial and the copper content ratio. The blade lasts longer and corresponds
to any coating materials
*if you experiense problems peeling the wire coating due to the materials even within the applicable size.please ask us for more deails
power source : 100v ( can modify voltage for your request)
80W / 95W
(50Hz) (60Hz)
Applicable to : Φ1.6ｍｍ to Φ2.7mm
Peeling speed : approx 16m / min
Size:W256mm x D165mm x H139mm
Weight :Approx 10.0kgs
小型電線被覆剥離機
電線マン
品番：ＡＤＭ－１５０
メモリの見易さが格段に向上！！
より太い電線も剥離可能に！
直径 Φ２１ｍｍ（１５０ｓｑ）まで可能
特徴：刃の高さ調整がとても簡単
刃物の間隔調整は拡大表示したゲージを上面に付けましたことにより
誰にでも簡単調整が可能に！
Φ３．２ｍｍから２１ｍｍまでの電線の被覆を剥離可能に
＊電線の種類によっては剥離できない場合がございます
詳しくはお問い合わせください
２つの挿入口でらくらく剥離
電線の被覆を剥離するための挿入口は単線とより線の２挿入口方式を採用し
わかりやすい簡単操作が可能です
仕様
電源：ＡＣ１００Ｖ １６０Ｗ
サイズ：Ｗ297 ｘ Ｄ２１０ ｘ Ｈ１７１ｍｍ
重量 ： 約１２ｋｇｓ
対応 ：被覆線：Φ３．２ｍｍ～２１．０ｍｍ
剥離速度 ：約２０ｍ / 分
Table-top wire and cable peeling unit
Model:ADM-150
Quite easy to adjust the blades height
The enlarged display gauge on the top makes it easy for anyone to adjust the space between blades.
Two insertion feeds
make wire peeling easy
there are two insertion feeds for peeling solid and strandes wires,
it is quite simple to use
power source : 100v ( can modify voltage for your request)
Applicable to : Φ3.2ｍｍ to Φ21.0mm
Peeling speed : approx 20m / minites
Size:W297mm x D210mm x H171mm
Table top wire and cable peeling unit
Model:ADM-02
You only need this machine to peel fine solid
stranded wires and wire harnesses
Generally you needed to prerare more than one machine depending on
diamete or types of the wire.Only our compact sized machine can peel
this various wires with one insertion feed.
Peeling ability : approx 2.5kg/h
oparation is safety and easy
The blade's hieght dones not needs to be adjusted for each wires
diameters.The insertion feed is small enought to prevent inceerting
fingers.so anyone can use it safety and easily for peeling work!
The blade is adjustable to get the right presshure
Can peel any coation from any wire.The blade pressure
can be adjusteed according to the coating material and the copper content ratio.
The blade longer and corresponds to any coating materials
*If you experoence diffculties to peeling some wire coationg due to the materials even within the applicable size
please ask us for more details
Power source : 100 v 80W / 95W
(50Hz) (60Hz)
(can modify voltage for your request
Weight : approx 10.0Kg
Applicable to Φ2.0mm to 3.4mm
Peel spead : approx 16m/min
Size : W 260mm x D174mm x H139mm
Table-top wire and cable peeling unit
Model:ADM-V1-S
VVF(va)one-shot wire and cable peeling!
No problem with peeling twist and distarted wires
East to peel solid,2 and 3 core copper wires
from 1.3mm to 2.6mm in diameter!!
Specialized machine for solid wire and WF(VA)
from 1.3 to 2.6mm diameter copper wires
Coated 2 and 3 core VVF(VA) and solod wires can be peeled at onece
*Adjustmentment is necesory for 3 and 4 core copper wires
with 2.6mm in diameter
Power source : 100 V 600W / 690W
(50Hz 60Hz)
Voltage can be modify for you request
Applicable to 1.6mm to 2.6mm (Core)
Peel speed :
Size : W399mm X D212mm X H254mm
